36
PLEASE NOTE
˙ The control solution results are NOT stored in the memory (please refer
to NOTE on page 23 for more information). The list of past results and the
result averages are for blood glucose results only.
˙ When pressing the
button to recall the test results, the meter will rst
display date and time. If you do not press the
button within 5 seconds,
the blinking “
” and “ ”will appear. In the meantime, you can choose to
insert a test strip to start testing your blood or press the
button again
to review the stored test results.
˙If no button is pressed for 3 minutes, the meter will display “OFF” and
turn off automatically.
To Next Page
Loading...
