Force 5100ex - Prewet; Feedback; Prewet Shutoff; Range

5100ex Calibration Manual
Description of Calibration Values
26
Prewet
The Prewet sub menu allows you to configure buzzer settings for the prewet errors and
warnings. If Config → Application Mode is set to Direct 1 Lane or Direct 3 Lane or if
Prewet is set to disbled, this menu will be disabled.
Feedback
The Feedback menu item adjusts the buzzer setting for the prewet feedback
error. The options are Silent, Single Chirp, Single Beep, and Solid Tone. The
default value is Single Beep.
Prewet Shutoff
The Prewet Shutoff menu item adjusts the buzzer setting for the prewet shutoff
error. The options are Silent, Single Chirp, Single Beep, and Solid Tone. The
default value is Single Beep.
Range
The Range menu item adjusts the buzzer setting for the prewet range error. The
options are Silent, Single Chirp, Single Beep, and Solid Tone. The default value
is Single Chirp.
Low Prewet
The Low Prewet menu item adjusts the buzzer setting for the low prewet
warning. The options are Silent, Single Chirp, Single Beep, and Solid Tone. The
default value is Single Beep.
Direct
The Direct sub menu allows you to configure buzzer settings for the direct errors and
warnings. If Config → Application Mode is set to Granular, this menu will be disabled.
Feedback
The Feedback menu item adjusts the buzzer setting for the direct feedback error.
The options are Silent, Single Chirp, Single Beep, and Solid Tone. The default
value is Single Beep.
Direct Shutdown
The Direct Shutdown menu item adjusts the buzzer setting for the direct
shutdown error. The options are Silent, Single Chirp, Single Beep, and Solid
Tone. The default value is Single Beep.
Range
The Range menu item adjusts the buzzer setting for the direct range error. The
options are Silent, Single Chirp, Single Beep, and Solid Tone. The default value
is Single Chirp.
Low Direct
The Low Direct menu item adjusts the buzzer setting for the low direct warning.
The options are Silent, Single Chirp, Single Beep, and Solid Tone. The default
value is Single Beep.
Body Up
The Body Up menu item adjusts the buzzer setting for the body up warning. The options
are Silent, Single Chirp, Single Beep, and Solid Tone. The default value is Silent.