5100ex Calibration Manual
Upgrading Firmware
48
Figure 14: Upgrade Firmware screen with File Selector
STEP 5: Use the up and down arrow buttons to select an upgrade file to use. If more than
6 upgrade files are available, use the page left and page right buttons on each
side of the box to see the other files.
STEP 6: Press the Ok button to select a file. A confirmation box similar to Figure 15 will
appear.
Figure 15: Upgrade Firmware File Confirmation
STEP 7: If the file listed is the correct file, press the Ok button to begin the upgrade
process and Figure 16 will appear. Otherwise press Cancel and return to STEP
5:
To Next Page
Loading...