1. Press the unlocking handle and pull the
loadspace floor rearwards a short way.
2. Lift up the rear of the floor (1).
3. Push the floor forwards until it engages
at the front (2).
4. Release the support leg from the clip
on the underside of the floor.
5. Insert the end into the square retainer
in the left-hand rail (3).
6. Lift the storage compartment cover
using the loop.
To return the loadspace floor to the normal
position:
1. Hold the floor with one hand and
release the support leg with the other
hand.
2. Insert the support leg back into the clip.
3. Lower the floor.
4. Press the unlocking handle and pull the
loadspace floor rearwards until it drops
into position on the rails.
REAR UNDER FLOOR
STORAGE
Vehicles with a sliding loadspace
floor
Raise the loadspace floor to gain access
to the storage compartment. See Sliding
Loadspace Floor (page 197).
198
Galaxy/S-MAX (CA1) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 18-12-2014, CG3533en enGBR, Edition date: 11/2013, Second Printing
Load Carrying
To Next Page
Loading...
