EasyManua.ls Logo

Ford S-MAX - Fastening the Safety Belts; Second Row Center Safety Belt

Ford S-MAX
348 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The driver and front passenger safety belt
retractors are fitted with a safety belt
pretensioner. Safety belt pretensioners
have a lower deployment threshold than
the airbags. During minor collisions, it is
possible that only the safety belt
pretensioners will deploy.
Status after a collision
WARNING
Safety belts subjected to strain, as a
result of an accident, should be
renewed and the anchorages
checked by a properly trained technician.
FASTENING THE SAFETY
BELTS
WARNING
Insert the tongue into the buckle until
you hear a distinct click. You have
not fastened the safety belt properly
if you do not hear a click.
Note: The safety belt tongues are designed
so that you can only insert them into the
correct buckle.
Pull the belt out steadily. It may lock if you
pull it sharply or if the vehicle is on a slope.
Press the red button on the buckle to
release the belt. Let it retract completely
and smoothly.
Second row center safety belt
The retractor for the rear center safety belt
is located in the roof.
To fasten the safety belt:
30
Galaxy/S-MAX (CA1) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 18-12-2014, CG3533en enGBR, Edition date: 11/2013, Second Printing
Occupant protection

Table of Contents

Other manuals for Ford S-MAX

Related product manuals