Ford S-MAX - Audio Troubleshooting

AUDIO TROUBLESHOOTING
RectificationAudio unit display
General error message for CD fault conditions, for
example cannot read the CD, data-CD inserted. May
also indicate a audio unit malfunction. Make sure that
the disc is correctly loaded, clean and reload the CD or
replace the CD with a known music CD. See Ejecting
compact discs (page 288). See Loading compact
discs (page 286). If error continues. See your dealer.
CD ERROR
PLEASE CHECK CD
CDC ERROR
Message to indicate that the audio unit or CD changer
is empty. Insert a CD. See Loading compact discs
(page 286).
NO CD
NO CDS
NO CD #
Ambient temperature too hot – unit will not work until
it has cooled down.
HIGH TEMP
CD DRIVE HIGH TEMP
Message to indicate that the CD slot is already loaded.
Eject the CD from selected slot before attempting load
operation or select another slot location. See Loading
compact discs (page 286).
SLOT FULL
Message to indicate that the audio unit is full. See
Ejecting compact discs (page 288).
CDC FULL
An incompatible CD has been inserted, for example not
an audio CD. See Ejecting compact discs (page 288).
DATA CD
Message to prompt you for the keycode. See Entering
a security code (page 275).
CODE ----
Message to inform you to wait until the next keycode
entry attempt can be made. See Incorrect security
code (page 275).
WAIT
Message indicates the number of incorrect input
attempts. See Incorrect security code (page 275).
TRIES
Message to inform you that audio unit security system
has locked the unit after repeated incorrect keycode
entries. See your dealer.
LOCKED
Message to prompt you for the keycode. See Entering
a security code (page 275).
KEYCODE....
ENTER KEYCODE....
Message to inform you that the entered keycode is
incorrect. See Incorrect security code (page 275).
INCORRECT
292
Galaxy/S-MAX (CA1) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 18-12-2014, CG3533en enGBR, Edition date: 11/2013, Second Printing
Audio Troubleshooting