1. Pull the belt out steadily. It may lock if
you pull it sharply or if the vehicle is on
a slope.
2. Insert the smaller tongue into the black
buckle to the right of the center seat.
3. Pull the larger tongue across the lap
and insert it into the buckle to the left
of the center seat.
Note: If in constant use, you can leave the
belt buckled in the black buckle. When it is
not in use, or when you fold or move the rear
seats, you should release the belt from the
black buckle.
Press the red button on the left buckle to
release the belt. Let it retract.
Press the button on the side of the black
buckle to release the belt. Let it retract
completely and smoothly to the retractor
in the roof.
SAFETY BELT HEIGHT
ADJUSTMENT
To raise the height, grasp the D-ring and
move the pivot up.
To lower the height, grasp the D-ring, hold
the locking button on the height adjuster
pressed and move the pivot down.
Note: Lifting the slider slightly while
pressing the locking button makes it easier
to release the locking mechanism.
BELT MINDER
WARNING
The occupant protection system will
only provide optimum protection
when you use the safety belt
properly.
31
Galaxy/S-MAX (CA1) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 18-12-2014, CG3533en enGBR, Edition date: 11/2013, Second Printing
Occupant protection
To Next Page
Loading...
