Ford S-MAX - Load Retaining Fixtures

WARNING
Make sure that the clamping hook is
correctly positioned.
Note: A force of approximately 100
newtons (23 lbs) is required to close the
cover.
4. Attach the clamping hook in the
position shown and close the cover.
WARNING
Make sure that the crossbars are
secure.
5. Lock the covers and remove the key.
LOAD RETAINING FIXTURES
WARNINGS
Do not raise the seatback when a
load retaining fixture is installed.
Do not exceed the maximum
permissible load of 60 kilograms (132
pounds) on two load retaining
fixtures and 30 kilograms (66 pounds) on
one.
Check the security of the load retaining
fixtures and tighten its fittings as follows:
• before starting
• after driving 50 kilometers (30 miles)
• at 1 000 kilometers (600 miles)
intervals.
204
Galaxy/S-MAX (CA1) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 18-12-2014, CG3533en enGBR, Edition date: 11/2013, Second Printing
Load Carrying