Ford S-MAX - Front Fog Lamps; Rear Fog Lamps; Headlamp Leveling

Note: The system may take a short time to
initialize after first switching the ignition on,
especially in very dark conditions. The high
beam will not automatically switch on
during this period.
Setting the system sensitivity
The system has three sensitivity levels
which can be accessed via the information
display. See Information Displays (page
89).
The sensitivity determines the speed at
which the high beam will be restored after
detected traffic leaves the field of view.
Manually overriding the system
Use the high beam lever to switch between
high beam and low beam.
Note: This is a temporary override and the
system will return to automatic operation
after a short period.
To permanently deactivate the system use
the information display menu or turn the
lighting control switch from autolamps to
headlamps.
FRONT FOG LAMPS
WARNING
Only use the front fog lamps when
visibility is considerably restricted by
fog, snow or rain.
REAR FOG LAMPS
Note: Only use the rear fog lamps when
visibility is restricted to less than 50 meters
(164 feet).
Note: Do not use the rear fog lamps when
it is raining or snowing and visibility is more
than 50 meters (164 feet).
HEADLAMP LEVELING
Note: Vehicles with Xenon headlamps are
equipped with automatic headlamp
leveling.
58
Galaxy/S-MAX (CA1) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 18-12-2014, CG3533en enGBR, Edition date: 11/2013, Second Printing
Lighting