Ford S-MAX - Installing the Load Bracket

Installing the load bracket
WARNINGS
Install the load bracket with the
longest section towards the rear of
the vehicle. If you install it the wrong
way round, it may not hold the box in place
in the event of an accident.
Do not install the load bracket on a
second row seatback. It cannot be
installed the right way round in this
position.
Do not exceed the maximum
permissible load of 20 kilograms (44
pounds).
1. Turn the box over.
2. Position the load bracket.
3. Secure the load bracket with four
screws.
4. Slide the captured bolts onto the load
retaining fixture.
207
Galaxy/S-MAX (CA1) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 18-12-2014, CG3533en enGBR, Edition date: 11/2013, Second Printing
Load Carrying