Ford S-MAX - Inserting the Tow Ball Arm

Unlocking the tow ball arm
mechanism
1. Remove the protecting cap (1). Insert
the key and turn it clockwise to unlock
(2).
2. Hold the tow ball arm. Pull the
handwheel out and turn it clockwise
until it clicks (3).
3. The red mark on the handwheel must
align with the green mark on the tow
ball.
4. Release the handwheel. The tow ball
arm is unlocked.
Inserting the tow ball arm
WARNING
The tow ball arm may only be
inserted when completely unlocked.
1. Pull out the plug.
2. Insert the tow ball arm vertically and
press it upwards until it engages (1).
Do not hold your hand near the
handwheel.
3. The green mark on the handwheel
must align with the green mark on the
tow ball.
4. To lock, turn the key counterclockwise
and remove the key (2).
5. Pull the protecting cap from the key
bow and press it onto the lock.
212
Galaxy/S-MAX (CA1) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 18-12-2014, CG3533en enGBR, Edition date: 11/2013, Second Printing
Towing