"PHONE"
"CONNECTION"
4
"MENU"
1 2
1
These commands are not available until phone information is completely downloaded
using Bluetooth.
2
See Dial table below.
3
See Menu table below.
4
See Connection tab below.
Phone book commands
When you ask SYNC® to access a phone
book name, number, etc., the requested
information appears in the display to view.
Press the PHONE button and say
"CALL/DIAL" to call the contact.
"CALL" / "DIAL"
"Number <(0-9)>"
"DELETE" (deletes one digit)
"PLUS"
"POUND" / "HASH", (#)
"ASTERISK" / "STAR" (*)
"CLEAR" (deletes all entered digits)
"123" (one-two-three). "121" (one-two-one), etc.
"700" (seven hundred)
"800" (eight hundred)
"900" (nine hundred)
Note: To exit dial mode, press and hold the
PHONE button or press MENU to go to the
Phone menu.
Note: "CALL" command is used to call a
phonebook contact and cannot be used to
enter the phone number.
Note: "DIAL" command is used to call by
entering a number and cannot be used for
a phonebook contact.
14
SYNC
To Next Page
Loading...
