Ford SYNC - How SYNC Interacts with Your Bluetooth Enabled Cellular Phone

Dialling a number using the telephone
keypad
If you have an audio unit with a telephone
keypad (buttons 0-9, * and #):
1. Press PHONE button.
2. Press the up or down arrow buttons
until Dial a number is shown.
3. Press OK button.
4. Dial the number using the telephone
keypad on the audio unit.
5. Press OK button.
Note: : Press and hold '0' to enter a + digit.
Ending a call
Calls can be ended by:
• Pressing the END CALL button.
• Pressing the OK button.
• Pressing and holding the PHONE
button.
Redialling a number
1. Press the PHONE button.
2. Press the up or down arrow buttons
until Call history is shown.
3. Press OK button.
Note: If the active phone does not provide
a call out list, the last outgoing call
number/entry can be redialled.
4. Press the up or down arrow buttons to
select the desired call history and press
OK button.
5. Press the up or down arrow buttons to
select the desired phone number and
press OK button.
Redialling the last dialled number
Press thePHONE button twice to redial
the last dialled number.
Using the Speed Dial Feature
Set speed dial
1. Press the PHONE button.
2. Select Phonebook or Call history.
3. Press the up or down arrow buttons to
locate the desired number you want to
set as a speed qial.
4. then press and hold one of digits
key"0~9" till a poping up shows to
confirm "Store to speed dial #
<0~9>"
Quick dialling
1. Press the PHONE button.
2. Hold the setted digits key "0~9" to
make a call or
3. Press the up or down arrow buttons to
select Speed dial.
4. Locate the desired phone number.
5. Press OK button.
Receiving an incoming call
Accepting an incoming call
Incoming calls can be accepted by pressing
the RECEIVE CALL button, or by pressing
the OK button.
Rejecting an incoming call
Incoming calls can be rejected by pressing
the END CALL button.
Receiving a second incoming call
If there is an incoming call whilst there is
an ongoing call, a beep will be heard and
you will have the option to end the active
call and to accept the incoming call.
Accepting a call
Press the RECEIVE CALL or PHONE or
OK button to accept the second incoming
call.
17
SYNC