If You Want ToSay
Hear the most recent incoming SMS text message."READ MESSAGE"
Hear a list of voice commands available in the current
mode.
"HELP"
Cancel the requested action."CANCEL"
Helpful Hints
• Make sure the interior of the vehicle is
as quiet as possible. Wind noise from
open windows and road vibrations may
prevent the system from correctly
recognizing the spoken commands.
• After pressing the voice control button,
wait until after the tone sounds and
"Listening" appears before saying a
command. Any command spoken prior
to this will not be recognised by the
system.
• Speak naturally, without long pauses
between words.
• The system can interrupt at any time
by pressing the voice control button.
• Don't stay too far or too close to SYNC
microphone when speaking out voice
commands.
• Don't rush to say any command to
SYNC before hearing the VR(Voice
Recognition) starting chime "ding".
• At any time, you may press voice
control button and say "HELP" for
assistance.
• In the middle of voice session, if want
to cancel current operation, you can
say "CANCEL" or press the up or down
arrow button in front control panel or
steering wheel.
• To say some commands directly
without listening some long prompts,
press the voice control button once to
abort the current prompts speaking.
System Interaction and Feedback
The system provides feedback through
audible tones, prompts, questions and
spoken confirmations depending on the
situation and the chosen level of
interaction (voice settings). You can
customize the voice recognition system to
provide more or less instruction and
feedback.
The default setting is to a standard
interaction mode in order to help you learn
to use the system. You can change these
settings at any time.
Adjusting the Interaction Level
Push the voice control button.
Say "VOICE SETTINGS" when
prompted, then any of the
following:
8
SYNC