Ford SYNC - Commands Used When in a Call; Making a Call

Commands used when in a call
Press VOICE BUTTON and when prompted, say any of the following command
"GO TO PRIVACY"
"HOLD"
"JOIN"
"MUTE CALL ON"
"UNMUTE CALL"
Making a call
Dialling a number using voice
command
Press the VOICE BUTTON and when
prompted say:
Type 1
1. "CALL <name>
MOBILE/HOME/WORK/OFFICE/OTHER".
2. If there are several numbers listed
under the desired category, choose the
line number by saying "LINE 1/2/3".
Type 2
1. "CALL <name>".
2. System will feedback "CALL <name>,
Is that correct?"
3. Say "YES".
4. System will ask "CALL <name>
mobile/home/work/office/other,
Is that correct?"
5. Based on the numbers shown in the
display, say
"MOBILE/HOME/WORK/OFFICE/OTHER".
6. If there are several numbers listed
under the desired category, choose the
line number by saying "LINE 1/2/3".
Type 3
1. "DIAL".
2. System will ask "Please say a
number".
3. You can say the desired number
<0-9>.
4. System will repeat the number you
have said.
5. Say "DIAL".
Dialling a number using the address
book
1. Press PHONE button.
2. Press the up or down arrow buttons
until Phonebook is shown.
3. Press OK button.
Note: You can also use the telephone
keypad to select the first letter of the entry
you are looking for. Press the relevant
number that corresponds to the letter
repeatedly until the required letter is
displayed.
4. Press the up or down arrow buttons to
select the desired phone number.
Note: Press and hold the up or down arrow
buttons to search forwards or backwards
within the phonebook.
5. Press OK button to dial the selected
phone number.
16
SYNC