Formlabs Form 2 - Washing your print

3D PRINT - FormLab 2 CHAPTER 2. START UP
• Clean the build platform with kimtech paper.
2.6 Washing your print
• Drop your print in the Isopropyl (ISO) alcohol bucket 1 .
• Agitate your 3d print during 30 second 2 .
• Leave for 10 minutes in the ISO 2 .
• Drop your print in the second ISO bucket 3 .
• Agitate your print durinf 30 second 3 .
• Leave for 10 minutes 3 .
13