Formlabs Form 2 - Page 2

3D PRINT - FormLab 2
This instruction manual describes the basic operations of the FormLab 2 print.
System consists of :
• Form 2 : Stereolithography SLA
• Build Volume : 145 x 145 x 175mm
• Layer Thickness: 25, 50, 100 microns
• Laser Spot Size: 140 microns
• Laser specifications: 405nm violet laser / 250mW
• Materials: Black, Flexible and Tough Resin
https://formlabs.com/3d-printers/tech-specs/
1