P a g e | 7
9. Never climb onto the hopper area while the machine is in operation.
10. Material can be forcibly ejected from the hopper towards the operator. Ensure
full head and face protection is worn.
11. Very twisted material should be trimmed into manageable pieces. Failure to
do this can result in material extending outside the hopper, moving
aggressively side-to-side creating a hazard to the operator.
12. Do not try to force material over 150mm in diameter into the machine.
13. Carefully site the machine so operators can work furthest from any local
danger. For example, on a road side, place machine so operators work on
the verge and not in the road exposed to traffic.
Machine lifting
The lifting eye is designed for securely holding the machine’s weight only. Do not
use hoist hook directly on the lifting eye. Use a correctly rated safety shackle.
Inspect lifting eye before each use and do not use if damaged.
Figure 2
To Next Page
Loading...
