Configuration
set sim-slot
FortiWiFi-40F-3G4G (lte-modem) # set sim-slot
sim-slot Enter an integer value from <1> to <2> (default = <1>).
This command enables you to manually set the SIMslot (of the two slots)to be used for connection.
This option is available only when sim-hot-swap is disabled so that FortiOS will not
perform auto selection.
set sim-lock-passcode
For platforms with SIM PLMN feature, this option is for you to enter the predefined passcode to unlock the SIM card lock
PLMN prefix lock, as illustrated below.
You have five trials to enter the correct passcode. If you fail to enter the correct passcode, you'll have to reboot the
system to reset the trials, as illustrated below.
Once you have entered the passcode correctly, two more configuration will now be available: “PLMN-code” and
“modify-sim-lock-passcode”. They allow you to change unlock passcode and modify the allowed PLMN prefix
for the SIM card. Currently, only one PLMN prefix entry can be modified. FortiOS will use this PLMN prefix to match
against the one in the IMSI code fetched from the SIM card. If they don’t match, FortiOS will not send the connect
request to the modem.
The PLMN code prefix is matched literally with the IMSI code from the SIM card. Therefore,
any extra strings in the PLMN code setting, such as leading or tailing spaces, may lead to
connection failure!
The system default is set as unlock, i.e., the passcode is set as empty, and you can set your own passcode. To lock
again, simply unset the sim-lock-passcode configuration and the other two options will be hidden again.
FortiGate-FortiWiFi 5.0 3G4G LTE Modem Operator's Manual 29
Fortinet Technologies Inc.
To Next Page
Loading...