Introduction
Introduction
The FortiGate/FortiWiFi 30E-3G4G devices come with a built-in 3G/4G LTE modem to provide additional Internet
connection and/or redundant WAN link for its customers.
This Manual discusses how to configure the built-in LTE modem as the Internet access interface. It must be noted that,
to provide Internet connections to the end devices on your network through the LAN ports, the devices must operate in
NAT mode; it does not work in transparent mode. The term "LTE modem" means an LTE-capable modem. It does not
mean that the modem is only able to work in LTE mode.
This Manual covers the configuration of the internal LTE modem only. For configuration of the other features of your
FortiGate/FortiWiFi devices, refer to the latest FortiGate/FortiOS documentation and FortiWiFi documentation.
We strongly recommend against putting any USB modem into the external USB port because it might confuse the
system and cause the built-in LTEmodem to malfunction. On the other hand, if you clearly understand what you are
doing, you can put a USB modem running the PPP protocol in the external USB port.
This Manual is based on FortiOS 6.0.6 GA release for FortiGate 30E GBL, unless further acknowledged. It is prepared
for technical staff of Fortinet Inc. and customers of FortiGate 30E and FortiWiFi 30E devices with the integrated 3G/4G
LTEmodem.
FortiGate-FortiWiFi 5.0 3G4G LTE Modem Operator's Manual 6
Fortinet Technologies Inc.
To Next Page
Loading...