Fortinet FortiGate-FortiWiFi - Configure Modem via Console

Configuration
6.
In the Status column, under Physical (2), make sure that wwan which is the LTEnetwork is up (as indicated by a
green up arrow).
A green up arrow in the Status column indicates that the LTE modem is connected and
functioning properly, whereas a red down arrow indicates the opposite.
You can double-click this row to view and edit the settings of the interface. Most important of
all, make sure that the status of the interface is set to Enabled.
Configure the modem from FortiGate Console
Configuring the 3G/4G LTEmodem from the FortiGate Console requires the following major steps:
l Connect your server to FortiGate on page 18
l
Create wireless profiles
l Configure the LTE modem on page 21
Connect your server to FortiGate
The following instructions show how to access your FortiGate 30E from a server (computer) via its console port.
1.
Use the serial cable (included in your product package)to connect the serial port of your computer to the console
port of your FortiGate 30E.
2.
Start a serial console terminal program from your computer, and set the port to:
FortiGate-FortiWiFi 5.0 3G4G LTE Modem Operator's Manual 18
Fortinet Technologies Inc.