Fortinet FortiGate-FortiWiFi - MIBs and SNMP; MIB File Management

MIBs
MIBs
All information invoked by the various diagnose sys lte-modem commands are available as read-only
MIBentries. This section discusses how to access and read the MIB information abput the internal LTEmodem.
l Download MIBfiles on page 50
l Enable SNMP support on page 50
l Create SNMPcommunity on page 51
l Allow SNMPaccess on page 52
l Configure a MIBbrowser on page 53
l Browse for internal LTE modem MIBentries on page 54
l Drill down to MIBentries on page 56
Download MIBfiles
FortiGate has two MIB files: FortiGate MIB file and Fortinet Core MIB file. It requires to use the common Fortinet Core
MIB (FORTINET-CORE-MIB.mib) for SNMP monitoring.
The following procedures show how to download the MIB files from the FortiGate GUI.
1. From the menu, select Systems >SNMP.
2.
On the SNMPpage, click the download buttons to download the MIB files, as highlighted below.
3.
Enable SNMP support
The following procedures show how to configure FortiGate 30E-GLB for SNMPsupport.
1. On the SNMPpage (see above), enable SNMP Agent to make the FortiGate an SNMPagent.
2.
Enter a brief description.
FortiGate-FortiWiFi 5.0 3G4G LTE Modem Operator's Manual 50
Fortinet Technologies Inc.