Fortinet FortiGate-FortiWiFi - Execute Lte-Modem Wireless-Profile Create; Qmi_Wds_Pdp_Type_Ipv4; Qmi_Wds_Pdp_Type_Ppp; Qmi_Wds_Pdp_Type_Ipv6

execute lte-modem
0 ==> QMI_WDS_PDP_TYPE_IPV4
1 ==> QMI_WDS_PDP_TYPE_PPP
2 ==> QMI_WDS_PDP_TYPE_IPV6
3 ==> QMI_WDS_PDP_TYPE_IPV4_OR_IPV6
Authentication:
0 ==> QMI_WDS_AUTHENTICATION_NONE
1 ==> QMI_WDS_AUTHENTICATION_PAP
2 ==> QMI_WDS_AUTHENTICATION_CHAP
3 ==> QMI_WDS_AUTHENTICATION_PAP|QMI_WDS_AUTHENTICATION_CH
A modem can store up to 16 wireless profiles indexed by profile ID from 1 to 16.
The EM73xx modem does not support the 3GPP2 profile. Whether the modem is configured to 3G network UMTS or
CDMA, or LTE, the profile type is 3GPP.
The PDP profile limits the types of networks that the modem is able to connect to. On FortiGate 30E 3G4G devices,
only IPv4 and IPv6 networks are supported. Usually you can specify PDP type 3 to enable IPv4 and IPv6 at the same
time. However, because FortiGate 30E 3G4G devices do not support IPv6 for now, it has not effect if you set PDP type
to IPv6 only.
Usually, no authentication is required in a wireless profile. Still, you can enable authentication on a data connection,
using either PAP or CHAP. You can always specify authentication type 3 whether the real authentication type is PAP or
CHAP, for the modem knows how to handle it.
If authentication is enabled in a wireless profile, username and password will be required. However, when viewing a
wireless profile, you are able to see the username only; the password is always hidden.
execute lte-modem wireless-profile create
The execute lte-modem wireless-profile create command allows you to create wireless profiles. You
can create up to 16 wireless profiles.
When creating a wireless profile, you do not need to specify a profile ID, because the modem automatically assigns one
for you. The following image shows the creation of a wireless profile named "profile5".
FortiWiFi-40F-3G4G # exec lte-modem wireless-profile create
<name> Wireless profile name 1 to 16 characters.
FortiWiFi-40F-3G4G # exec lte-modem wireless-profile create profile1
(0, 1) Wireless profile type.
0 - 3GPP
1 - 3GPP2
FortiWiFi-40F-3G4G # exec lte-modem wireless-profile create profile1 0
(0 - 4) Wireless profile PDP type.
0 - IPV4
1 - PPP
2 - IPV6
3 - IPV4V6
FortiWiFi-40F-3G4G # exec lte-modem wireless-profile create profile1 0 3
<name> Wireless profile APN name 0 to 32 characters.
FortiGate-FortiWiFi 5.0 3G4G LTE Modem Operator's Manual 38
Fortinet Technologies Inc.