diagnose sys lte-modem
RSSI: -51
RSRQ: -13
RSRP: -87
SNR: 26
This command shows the signal type and strength the modem is able to obtain at the moment. Depending on the
firmware that the modem is running, the signal information can be of the following types.
Signal
Type
Network Parameter
CDMA CDMA RSSI,
ECIO
HDR CDMA RSSI,
ECIO,
SINR, IO
GSM GSM GSM
WCDMA GSM RSSI,
ECIO
LTE CDMA/GSM RSSI,
RSRP,
RSRQ,
SNR
TDMA GSM TDMA
Signal information is sampled at 1-minute, 10-minute, 30-minute, and 1-hour intervals. Once the GUI implementation is
done, you we will be able to get charts for signal strength.
The following chart shows the quality evaluations for modem LTE signal strength.
You can use the diagnose test application 5 command to get a more
comprehensive modem signal strength dump.
FortiGate-FortiWiFi 5.0 3G4G LTE Modem Operator's Manual 33
Fortinet Technologies Inc.
To Next Page
Loading...