WWW.FOSCAM.COM FI8908/FI8908W User Manual
Control pan/tile if click center ,the camera will pan&tile
and then stop at the center
Prepoint set
Figure 2.19
: Click this icon; camera will rotate up and down. Click to stop.
: Click this icon; camera will rotate left and right. Click to stop.
:IO output Switch on / off .
Flip & Mirror: You can choose flip or mirror if you set up the camera in a special position.
Mode: There are three modes. (50HZ, 60HZ and outdoor)
Brightness and Contrast are also used to adjust the quality of the video.
Preset: You can set prepoint through this function,that is, click the button “set”. According to the
set you can return here from anywhere when you click the button “go”.
For Firefox, Google chrome and safari
Click Live Video. You can see the difference from IE and Firefox.
In IE, there is a button for default all the settings. In Firefox, the snapshot button is under for
operator. Add the other two function; refresh video and refresh parameters. (Figure 2.20)
ShenZhen Foscam Intelligent Technology Co., Ltd
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
17
To Next Page
Loading...
