WWW.FOSCAM.COM FI8908/FI8908W User Manual
ShenZhen Foscam Intelligent Technology Co., Ltd
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
39
4.1.9 I can’t find multi-device settings and record icon
Record and multi-device function are controlled by activeX controller.
So if you use Firefox, Google chrome and safari, it is impossible to use these function.
4.1.10 Camera can not connect wireless
If your camera could not connect wireless after you set wireless settings and plug out the cable.
Please check whether your settings are correct or not. (details: Wireless LAN settings in Quick
Installation Guide)
Normally, camera can’t connect wireless mainly because of wrong settings.
Make sure broadcast your SSID; use the same encryption for router and camera. Share key
should not contain special characters, only word and number will be better. Don’t enable MAC
address filter.
4.1.11 I can’t see other cameras which in multi-device when remote access
If you want to view all the cameras in WAN. Make sure that each camera you add in multi-device
settings can be logon use DDNS name and port number. Use DDNS domain name to fill in the
host checkbox, not camera’s LAN IP. (details: How to add cameras in WAN)
4.1.12 Only see black screen or unreasonable code when remote login
If you could access the login page in remote place, it indicates that your DDNS settings are
correct. You could not see living video but only some undefined characters, it may be the internet
speed problems, especially the camera work on Wi-Fi.
4.2 Default Parameters
Default network Parameters
IP address: dynamic obtain
Subnet mask: 255.255.255.0
Gateway: dynamic obtain
DHCP: Disabled
DDNS: Disabled
Username and password
Default administrator username: admin
Default administrator password: No password
4.3 Specifications
ITEMS FI8908/FI8908W
To Next Page
Loading...
