NVR User Manual
www.foscam.com
Step4 Check the checkbox to select the linkage method. You may refer to follow table for details of
linkage methods.
1．Click Set Detection Area button and it pop up a window.
When the Motion detection is triggered, you can choose whether to send e-mail.
Note: Make sure you have set Email.
When the Motion detection is triggered, you can choose whether to upload
detection picture to FTP server.
Note: Make sure you have set FTP.
If you select this checkbox, when the Motion detection is triggered, the NVR
will record automatically and store the record files to the HDD.
When you check the Record, you need to configure motion detection recording
time.
When the Motion detection is triggered, you can choose whether to enable
buzzing sound of the NVR device.
If you select this checkbox, when the Motion detection is triggered, the people
around the camera will hear beep alarm sound of the IPC.
To Next Page
Loading...
Need help?
General