Foscam FN7108E-B4-2T User Manual

NVR User Manual
www.foscam.com
55
Step2 Configure the FTP parameter.
Step3 Click Save button to take effect.
Step4
Click Test to see if FTP has been successfully configured.
If the test success, you can see the success information.
-------End
DDNS
The Foscam NVR has embedded a unique DDNS domain name when producing, and you can
directly use the domain name, you can also use the third party domain name.
Choose (Parameter Configuration) > Basic Settings > DDNS. The DDNS page is
displayed.
Parameter
Description
FTP Address
 If your FTP server is located on the LAN, you can set FTP address as
ftp://IP address.(eg.ftp://192.168.1.103/dir).
 If your FTP server is located on the WAN, you can set FTP address as
ftp://domain name/dir.(eg.ftp://test.no-ip.org/dir).
FTP Port
Default port is 21. If changed, external FTP client program must change the
server connection port accordingly.
FTP Mode
Here supports two modes: PORT and PASV.
FTP Username
The user account of FTP server.
FTP Password
The user password of FTP server.

Foscam FN7108E-B4-2T Specifications

General

Brand	Foscam
Model	FN7108E-B4-2T
Category	Cctv systems
Language	English