Foscam FN7108E-B4-2T User Manual

NVR User Manual
www.foscam.com
54
Step3
Click Save button to take effect.
Step4 Click Test to see if Mail has been successfully configured.
If the test success, you can see the success information, at the same time the receivers will receive a
test mail.
-------End
FTP Settings
The system can be configured to send an picture to the FTP server if an alarm or motion event is
detected etc..
Step1
Choose (Parameter Configuration) > Basic Settings > FTP Settings. The FTP
Settings page is displayed.
Parameter
Description
Enable E-Mail
Enable or Disable the Email function.
SMTP Server
The SMTP Server IP address or host name.
SMTP Port
The SMTP port is usually set as 25. Some SMTP servers have their
own port, such as 587 or 465.
Transport Layer
Security
Transport Layer Security usually is None.
If you use Gmail, Transport Layer Security must be set to TLS or
STARTTLS and SMTP Port must be set to 465 or 25 or 587, which
port you choose should be decided by which Transport Layer Security
you select.
SMTP Username
The user account of sender's Email for SMTP server authentication.
SMTP Password
The password of sender's Email for SMTP server authentication.
Sender
The Email address of sender.
Receivers
Address1/2/3/4
The Email address of user to be notified. you can set 4 receivers

Foscam FN7108E-B4-2T Specifications

General

Brand	Foscam
Model	FN7108E-B4-2T
Category	Cctv systems
Language	English