NVR User Manual
www.foscam.com
The system can be configured to send an email to the designated users if an alarm or motion event
is detected etc..
Before you configure the Email settings, the NVR must be connected to a local area network (LAN)
that maintains an SMTP mail server. The network must also be connected to either an intranet or the
Internet depending on the location of the e-mail accounts to which you want to send notification.
Step1 Choose (Parameter Configuration) > Basic Settings > Email. The Email page is
displayed.
Step2 Configure the Email parameter.
To Next Page
Loading...
Need help?
General