NVR User Manual
www.foscam.com
versions available.
Patch Installation
Choose (Parameter Configuration) > System Management > Patch Installation. The
Patch Installation page is displayed.
You can install or install patch of the NVR.
Click Browse to select the patch file in the local directory.
Factory Reset
Choose (Parameter Configuration) > System Management > Factory Reset. The Factory
Reset page is displayed.
Click Factory Reset button, then click OK button in the pop-up message box and all parameters will
return to factory settings. The NVR device will reboot automatically.
Reboot
Choose (Parameter Configuration) > System Management > Reboot. The Reboot page is
displayed.
Click Reboot button, then click OK button in the pop-up message box.The NVR system will reboot.
To Next Page
Loading...
Need help?
General