This chapter gives an overview of the two software programs used for operation
and network management of NIRS DS3 / DS3 F.
• ISIscan Nova
• FossManager
This user manual describes the main features and workflow for routine operations
in the ISIscan Nova software and some in the FossManager software, which is used
for configurations and setup. In both software systems you can find built-in Help
files which give further information on specific details.
The Help file in ISIscan Nova can be accessed either via by pressing the F1 key or
by clicking the question mark in the upper right corner in any view.
Fig. 9 ISIscan Nova help file
ISIscan Nova is the operating software for the NIRS DS3 / DS3 F. It contains all
necessary functionalities for the normal analysis routines:
• Select product and start analysis
• Enter Sample ID and other sample-related information fields
• Present results on screen, printer and/or transfer results to predefined network
location
• Detailed views for current or historic samples including audit trails for each
sample
• Generate result and diagnostic reports
• Perform diagnostics and instrument calibration
• Create backup of database
• Configuration for reporting, data transfer and backup paths
• Configuration and commands for communication with FossConnect server
• Initiate remote support session via Internet
To Next Page
Loading...
Need help?
General
