To summarise, Nova will automatically export if all the following conditions are
met:
• Export format is configured on the Master configuration system to either a
native .CSV format or to use a valid report template.
• The product for the sample is linked to an operation profile with Auto Export
enabled.
• The local setting in Nova is Turn off automatic export.
• The corresponding path is configured in Nova to a valid location.
If any one of these conditions is not fulfilled, auto export will not take place.
As soon as all conditions are met, auto export will start again from the next
measurement.
From the Print tab you can select a printer and the templates to be used when
printing from the Result view, History view or Graph view (‘Quick print reports’).
Fig. 60
When a printer and templates have been selected, a quick printing button becomes
visible in the views for which you have selected a template.
Fig. 61
On the Backup tab you can:
• Enable auto backup of a database.
• Set the time and frequency for automatic backup.
• Set number of backups to keep before they are overwritten.
• Set destination path for the backup file(s).
To Next Page
Loading...
Need help?
General
