34
TECHNICAL SPECIFICATIONS
Engine power: 1200 W S1
Voltage and frequency: 230 V - 50 Hz
Speed: 4500 RPM.
Saw blade maximum dimensions: 210 x 30 x 2,5 mm (24 teeth)
Crosscut at 90°: 57 x 120 mm
Oblique cutting 45°: 55 x 70 mm
Inclined cutting 45°: 43 x 120 mm
Oblique cutting 45°: 23 x 40 mm
Left and right stops: 0° - 45° every 5°
Inclination stops: 0 and 45°
Net weight: 12 kg
Gross weight: 13 kg
Hand-arm vibration: < 2,5 m/sec2
NOISE CONDITIONS
The noise emitted, measured in conformity with the standards EN61029, EN3744 and EN11201
is:
- Sound pressure level LpA = 99 dB(A)
- Sound power level LWA = 112 dB(A)
- Uncertainty of measurement K = 3 dB
We recommend you to use ear protection devices.
The sources of the noise of the saw are: the electric engine and its ventilation system, the
speed reduction device, the blade and the material to be cut.
We advise you to control the engine, its ventilation system and the aspiration passages. As far
as the saw blade is concerned, it is preferable to use silenced type of blades and to keep them
in good conditions. We recommend to use the correct saw blade and to keep firmly the
workpieces to be cut.
Noise levels are emission levels and do not necessarily indicate safe working conditions. Even if
there is a connection between emission levels and exposure levels, the first ones cannot be
used to determine safely if other precautions are necessary. The factors that can influence the
actual exposure level of the operator include the exposure length, environmental features and
other sources of noise, as for example the number of machines and operations in the
surrounding area. Besides, exposure levels can change from country to country. However,
these instructions enable the user of the machine to better evaluate the dangers and risks.
To Next Page
Loading...
