Foxconn 45CS - Memory Configuration; Dram Timing Configuration

3
24





This item is used to enable/disable provision of DRAM timing by SPD device. The Serial
Presence Detect (SPD) device is a small EEPROM chip, mounted on a DDR2 memory
module. It contains important information about the module's speed, size, addressing mode
and various other parameters, so that the motherboard memory controller (chipset) can better
access the memory device.


CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.

      Help Item
DRAM Frequency 
Auto
400 MHz
533 MHz

F9:Optimized Defaults

Options
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.

        
  
Disabled
Enabled Enabled

F9:Optimized Defaults

Options