Name: Foxconn A74ML 3.0 Series
Brand: Foxconn
Rating: 5 (1 reviews)

To Next Page

To Previous Page

IDE Conguration

► OnBoard PCI IDE Controller

[Disabled]: Disable the integrated IDE controller.

[Enabled]: Enable the integrated IDE controller.

► OnChip SATA Channel

[Disabled] : Disable SATA controller.

[Enabled] : Enable SATA controller.

► OnChip SATA Type

This item is used to set the operating mode of your SATA ports.

Options : [Native IDE]; [RAID]; [AHCI]; [Legacy IDE].

[Native IDE] - This congures the SATA ports to support native IDE mode.

[RAID] - When you enable RAID, it means all your SATA drives must also support AHCI.

[AHCI] - The Advanced Host Controller Interface (AHCI) specication describes the register

level interface for a Host Controller for Serial ATA. The specication includes a description of

the hardware/software interface between system software and the host controller hardware.

AHCI provides more advanced features including SATA features, but some SATA drives may

not support AHCI, unless they are labeled with AHCI support in its specication.

If your motherboard supporting AHCI, and you have a SATA device, which also supports AHCI,

then you can select IDE option to have fair performance (only PATA, SATA level), or you can

select AHCI to get its best performance.

[Legacy IDE] - This congures the SATA ports to support legacy IDE mode which is running

for old Windows system .

IDE Conguration

Help Item

OnBoard PCI IDE Controller

[Enabled] Disabled: Disable the

OnChip SATA Channel [Enabled] IDE controller.

OnChip SATA Type [Native IDE] Enabled: Enable the

IDE controller.

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F9:Optimized Defaults

[Enabled]

Questions and Answers:

Need help?

Do you have a question about the Foxconn A74ML 3.0 Series and is the answer not in the manual?

Foxconn A74ML 3.0 Series Specifications

General