Name: Foxconn A74ML 3.0 Series
Brand: Foxconn
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Creating a Bootable Array - Installing a new Windows XP (or Vista) in

a brand new RAID system.

1. Follow 5-1 to create a RAID driver diskette.

2. Follow 5-2 to set RAID enabled in BIOS.

3. Follow 5-3 to select a RAID array for use.

4. Follow 5-4 to Install a new Windows Operating System.

What kinds of hardware and software you need here :

1. A oppy drive.

2. A CD/DVD-ROM drive.

3. Several SATA hard disks.

4. A RAID driver diskette.

5. A motherboard driver CD. (To create RAID driver diskette if it is not bundled.)

6. Windows XP or Vista Install CD.

Creating a Non-Bootable Array - Existing Windows XP (or Vista)

system with new RAID built as data storage.

Follow 5-5 to go through the processes to build a new RAID array in your existing

Windows XP system, it includes :

1. Set RAID enabled in BIOS.

2. Follow 5-3 to select a RAID array for use.

3. Run setup program to install AMD RAID driver into your current Windows XP

system.

4. Use Administrative Tools in Control Panel to format new RAID array.

What kinds of hardware and software you need here :

1. A CD/DVD-ROM drive.

2. Several SATA hard disks.

3. A motherboard driver CD.

Questions and Answers:

Need help?

Do you have a question about the Foxconn A74ML 3.0 Series and is the answer not in the manual?

Foxconn A74ML 3.0 Series Specifications

General