Foxconn FlamingBlade GTI - Page 11

4
1
1 x Power fan header (3-pin)(NB_FAN1)
1 x IDE connector (Controlled by JMicron JMB363, for Flaming Blade/
Controlled by JMicron JMB368, for Flaming Blade GTI)
6 x SATA connectors
2 x USB 2.0 connectors (Supporting 4 x USB devices)
Back Panel 1 x PS/2 Keyboard port
Connectors 1 x Optical S/PDIF out connector
(Flaming Blade) 1 x Clear CMOS button
8 x USB 2.0 ports
2 x RJ-45 LAN ports
2 x External SATA ports (Controlled by JMicron JMB363)
8-channel audio ports
Back Panel 1 x PS/2 Keyboard port
Connectors 1 x Optical S/PDIF out connector
(Flaming Blade GTI) 8 x USB 2.0 ports
1 x RJ-45 LAN port
8-channel audio ports
Hardware Monitor System voltage detection
CPU/System temperature detection
CPU/System fan speed detection
CPU/System overheating shutdown
CPU/System fan speed control
PCI Express x16 Support 8GB/s (16GB/s concurrent) bandwidth
Low power consumption and power management features
PCI Express x1 Supports 500MB/s (1GB/s concurrent) bandwidth
(Only for Flaming Blade) Low power consumption and power management features
Green Function Supports ACPI (Advanced Conguration and Power Interface)
Supports S0 (normal), S1 (power on suspend), S3 (suspend to RAM), S4
(suspend to disk), and S5 (soft - off)
Bundled Software AEGIS PANEL
FOX LiveUpdate
FOX LOGO
FOX DMI
Operating System Supports for Microsoft
®
Windows
®
Vista/XP
Form Factor ATX Form Factor, 12 inches x 9.6 inches (30.5cm x 24.4cm)
This motherboard does not support Windows
®
2000.
C
A
U
T
I
O
N
!