Foxconn FlamingBlade GTI - Overclocking; OC Gear

60
4
3. Overclocking
Click "Overclocking" icon to enter the overclok setting menu. It allows you to adjust CPU
clock, and to change the voltages of CPU, chipset and memory. After you set the values, click
[Apply] button to apply it.
4. OC Gear
Click “OC Gear” icon to open OC Gear dialog. It is support to read OC Gear from BIOS
setting to le and support to write OC Gear setting from le to BIOS.
Benets: the user only adjust overclocking once and save it in OC Gear function under BIOS
setup utility (click “DEL” key to enter BIOS setup utility when boot and select Quantum
BIOS item), then easier change many platform just be set by this le.
Save to le from BIOS Setting Store to BIOS from le
Click these buttons to adjust
the CPU voltages
Apply the changes
Click these buttons to
adjust the CPU clock
Click these buttons
to adjust the PCIe
clock
Click these buttons to adjust
the Northbridge and Southbridge
voltage
Click these buttons
to adjust the memory
voltage