EasyManuals Logo

Foxconn FlamingBlade GTI User Manual

Foxconn FlamingBlade GTI
122 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #33 background imageLoading...
Page #33 background image
26
3
Standard CMOS Features
This submenu is used to set up the standard BIOS features, such as the date, time, oppy drive
and so on. Use the arrow up/down keys to select an item, then use the <+> or <-> keys to change
the setting.
Date - <weekday><month><date> <year> format
Day—weekday from Sun. to Sat., automatically displayed by BIOS (Read Only).
Month—month from 1 to 12.
Date—date from 1st to 31st.
Year—year, set up by users.
Use <Enter>, <Tab> keys to select a eld. Use <+>, <->, <PageUp> or <PageDown> to select
a value.
► Time - <hour> : <minute> : <second> format
This item allows you to congure the desired time. Use <Enter>, <Tab> to move forward and
select a eld. Directly input a value or use <PageUp>, <PageDown>, <+> or <-> to select a
value.
► SATA Port 1/2/3/4/5/6, IDE Channel Master/Slave, eSATA Port 1/2(only for Flaming Blade)
These categories identify the hard disks connected to the Intel
®
south bridge and JMicron
controllers in the system. In each channel’s display, you can press [Enter] to go to its sub-
menu. You can further congure specic drive settings.
[None], [Auto], and [Manual]. “None” means no HDD is installed or set; “Auto” means the
system can auto-detect the hard disk when booting up; by choosing “Manual” and changing
Access Mode to “CHS”, the related information should be entered manually.
In Access Mode setting, selections of [CHS], [LBA], [Large] and [Auto] can help you to select
hard drive for legacy compatibility.
Phoenix - AwardBIOS CMOS Setup Utility
Standard CMOS Features
Date (mm:dd:yy) Wed, Feb 11 2009 Item Help
Time (hh:mm:ss) 17 : 44 : 13
Menu Level ►
SATA Port 1 WDC WD2500JS-60NCB1
SATA Port 2
None Press [Enter] to enter
SATA Port 3
None next page for detail
SATA Port 4
None hard drive settings
SATA Port 5 None
SATA Port 6 None
IDE Channel Master
None
IDE Channel Slave
None
eSATA Port 1
None
eSATA Port 2
None
Drive A
1.44M, 3.5 in.
Halt On All Errors
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F7:Optimized Defaults
WDC WD2500JS-60NCB1

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Foxconn FlamingBlade GTI and is the answer not in the manual?

Foxconn FlamingBlade GTI Specifications

General IconGeneral
BrandFoxconn
ModelFlamingBlade GTI
CategoryMotherboard
LanguageEnglish

Related product manuals