25
3
PCI/PnP features, such as O/S supporting, IRQ/DMA settings and bus master enabling/
disabling...etc. can be modied through this menu.
► Hardware Monitor
This setup enables you to read/change fan speeds, and displays temperatures and voltages of
your CPU/System.
► Quantum BIOS
Some special proprietary features (such as overclocking) can be set up through this menu.
► Board Information
It displays the basic board information, such as BIOS ID, version, onboard LAN MAC
address...etc.
► Load Optimized Defaults
The optimal performance settings can be loaded through this menu. However, it may offer
better performance in some ways (such as less I/O cards, less memory ...etc.), still, it may
cause problem if you have more memory or I/O cards installed. It means, if your system
loading is heavy, set to optimal default may sometimes come out an unstable system. What
you need now is to adjust BIOS setting one by one, trial and error, to nd out the best setting
for your current system.
► Set Supervisor Password
The supervisor password can be set up through this menu.
► Set User Password
The user password can be set up through this menu.
► Save & Exit Setup
Save setting values to CMOS and exit.
► Exit Without Saving
Do not change anything and exit the setup.
When we talk about <+> and <-> keys in this manual, they are the single-keypad
keys of the numeric keypad which is located at the right hand side of your desktop
keyboard. They are not the combination keys made by pressing and holding down
<Shift> key rst, then press <+ => or <-_> key the next.
C
A
U
T
I
O
N
!
To Next Page
Loading...
Need help?
General
