To Next Page

To Previous Page

7. Depending on South Bridge chip of your system, select appropriate driver for

it. Here, because the SATA mode is set to RAID, we choose "Intel(R) Desktop/

Workstation/Server Express Chipset SATA RAID Controller" . Press <Enter> to

select it.

If the SATA mode in BIOS is set to AHCI, this screen will show different drivers, and

we need choose "Intel(R) Desktop/Workstation/Server Express Chipset SATA AHCI

Controller”.

8. A conrmation message pops out to double check if the driver is really what we

wanted. Press <Enter> to continue.

Windows Setup

Setup will load support for the following mass storage device(s):

Intel(R) Desktop/Workstation/Server Express Chipset SATA RAID Controller

* To specify additional SCSI adapters, CD-ROM drivers, or special

disk controllers for use with Windows, including those for

which you have a device support disk from a mass storage device

manufacturer, press S.

* If you do not have any device support disks from a mass storage

device manufacturer, or do not want to specify additional

mass storage devices for use with Windows, press ENTER.

S=Specify Additional Device ENTER=Continue F3=Exit

Windows Setup

You have chosen to configure a SCSI Adapter for use with Windows,

using a device support disk provided by an adapter manufacturer.

Select the SCSI Adapter you want from the following list, or press ESC

to return to the previous screen.

ENTER=Select F3=Exit

Intel(R) ICH7R/DH SATA RAID Controller

Intel(R) ICH7MDH SATA RAID Controller

Intel(R) ICH8R/ICH9R/ICH10R SATA RAID Controller

Intel(R) Mobile Express Chipset SATA RAID Controller

Intel(R) Desktop/Workstation/Server Express Chipset SATA RAID Controller

Foxconn Rattler User Manual

Questions and Answers: