EasyManuals Logo

Foxconn Rattler User Manual

Foxconn Rattler
111 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #105 background imageLoading...
Page #105 background image
5
98
9. Windows will display the partition of your system, you have to create partitions as
many as you wish, assign them C:, D: or E: drive names. After partitions were done,
you can press <Enter> to continue. It will ask you to format your hard disk, then
copy les...etc., until the whole Windows is setup.
10. You must always keep RAID diskette in the oppy drive during Windows XP
installation, otherwise, Windows may ask you to put it inside again by below
message. There are many times Windows XP may copy les from the oppy drive,
please remember.
11. Follow the Windows XP install processes to nish the set up.
Windows XP Professional Setup
The following list shows the existing partitions and
unpartitioned space on this computer.
Use the UP ad DOWN ARROW keys to select an item in the list.
● To set up Windows XP on the selected item, press ENTER.
● To create a partition in the unpartitioned space, press C.
● To delete the selected partitions, press D.
305251 MB Disk 0 at id 0 on bus 0 on iaStor [MBR]
ENTER=Install C=Create Partition F3=Quit
Unpartitioned space 305251 MB
Windows XP Professional Setup
Insert the disk labeled:
Intel Matrix Storage Manager driver
into drive A:
* Press ENTER when ready
F3=Quit ENTER=Continue

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Foxconn Rattler and is the answer not in the manual?

Foxconn Rattler Specifications

General IconGeneral
BrandFoxconn
ModelRattler
CategoryMotherboard
LanguageEnglish

Related product manuals