Foxtech DA16 - Screen Lock & Display; H; W Set

Foxtech DA16 Radio Control System User Manual
©
2018 FOXTECH All Rights Reserved
29
General Settings Menu Introduction
Bind
: Start linking DA16 transmitter to DA16 receiver.
Lang
. (Language): SwitchDA16 transmitter’s system language between Chinese/English.
THR
(Throttle Type): Switch throttle joystick type between “Self-centering” and “Thumb-slide”.
Joy
(Joystick Mode): Switch joystick mode from American Hand/Japanese Hand/Chinese Hand/Custom
Hand.
VIB
(Vibration): Turn on/off transmitter’s vibration alert function.
Sound
(Voice Broadcast): Turn on/off transmitter’s voice broadcast function.
Tx-Alarm
(Transmitter Low Battery Level Alert): Set a transmitter battery level limit lower than which
transmitter will alert.
RF Status
(Transmitting Status): Turn on/ off radio signal transmitting.
RDStep
(RD Stepping Value): Set transmitter right dial’s stepping value (range: 1-100). Higher it is, more
channel value the channel value increases in every movement.
Users can turn on / off DA16 transmitter’s screen lock, setting screen lock waiting time, adjust screen
brightness and screen sleep waiting time.
Screen Lock and Display Introduction
Screen Lock
: Users can do nothing touching on screen menu when screen lock is enabled.
Screen Lock Waiting Time
: Set waiting time before locking transmitter screen.
Screen Brightness
: Adjust screen brightness (range 1 - 20).
Screen Sleeping Time
: Turn on / off transmitter screen’s sleeping function (screen display turns off
automatically after waiting time) and set waiting time. When you set it “Never”, transmitter screen stays on.
Screen Lock & Display
H / W Set
When screen lock is enabled, press down a sub-trim button (LT5 direction of left sub-trim button, RT5
direction of right sub-trim button) for 3 seconds to unlock the screen.