61
Next Generation Diagnostic Platform NT726TS User's Manual V1.0
Figure 11-11 Sample Clone by Activation Function Screen
11.2.3 Automatic Create (1-16)
This function is designed to program the Foxwell sensor T10 by applying
random IDs created according to the test vehicle, when it is unable to obtain the
original sensor ID.
To Automatic Create
1. Tap Programming tab.
2. Select the specific wheel on the screen.
3. Tap the Automatic Create functional button on the screen.
4. Place the proper Foxwell sensor T10 near the top right of the Display
Tablet to write the new created sensor ID into the Foxwell sensor T10.
To Next Page
Loading...
