Editing
26
To save a preset press the
STORE
button. This brings up the
STORE
menu. The
LOCATION
box
contains the preset location at which the edit buffer will be stored. Next to that is the name of the
preset currently at that location (if any). If the preset is empty the name will say “
EMPTY”. To save
at a different location turn the value daily to modify the location number. To save your changes
press the
ENTER
button.
The
NAME box contains the name of the preset as stored in the edit buffer. To change the name
select the character you wish to change with the navigation buttons and turn the value dial to alter
the character. The Axe-Fx has a shortcut feature to help you name presets faster. Pressing the
PAGE
buttons cycles through a short list of convenient starting characters to help you find the character
you desire more easily.
Recalling Presets
Recalling a preset on the Axe-Fx is done simply by pressing the
RECALL
button and turning the
dial until the desired preset is selected.
The Axe-Fx features and “Effects Recall” function. This allows the parameters of an effect in a
preset to copied into the edit buffer. To use this feature simply navigate to the
EFFECT tab under
the
RECALL menu. Select the preset that you wish to load from and the effect in that preset that you
wish to load, and then press
ENTER
. The parameters of that effect will be loaded into the same
effect in the edit buffer.
This is useful when you have an effect set up just the way you like it and only want to copy that
effect into a preset you are building. Also note that any modifiers that are connected to the effect
will be copied as well greatly simplifying preset construction.
To Next Page
Loading...
