Tuner
96
Tuner
Pressing the
TUNER
button brings up the Axe-Fx tuner display. There are three pages. The first
page is the basic tuner display. The second page allows you to configure the tuner and the third page
allows you to enter custom tuning offsets.
CAL - This sets the reference frequency for the tuner.
MUTE - When set to ON this mutes the sound out of the Axe-Fx when in the tuner menu.
USE OFFSETS - When set to ON the custom temperament offsets entered on the
OFFSETS
page
are applied to the tuner display.
To Next Page
Loading...
