PRIMO Instruction Manual
4
1.4 Keeping and updating the instruction manual
The manual is an integral part of the product: it
must therefore be stored carefully and must
accompany the product in all changes of
ownership. Do not remove, tear out or arbitrarily
modify any part of it. Keep the manual in the
vicinity of the machine to which it refers.
The manual contains instructions for the model
and machine version to which it is attached.
The original version of the manual is written in
Italian; if you have any doubts about translations,
please refer to the Italian language or contact the
manufacturer at support@francosrl.com.
Further copies of the instruction manual can be
obtained from support@francosrl.com
1.5 Addressees
OPERATOR/USER: person capable of operating
the machine and performing the simplest cleaning
and maintenance tasks.
QUALIFIED PERSONNEL: technical personnel
trained by training courses, etc., capable of
carrying out complex installation, connection,
commissioning in maintenance, repair and
transport of the machine.
The machine is intended for
industrial/professional use and should therefore
only be used by operators who
- have reached the age of majority;
- are physically and mentally fit to perform
work of medium technical difficulty;
- have been properly instructed in the use
and maintenance of the machine;
- have been judged by their employer to be
fit to perform the task entrusted to them;
- are able to understand and interpret the
operator's manual and safety instructions;
- know the emergency procedures and how
to implement them;
- are able to operate the specific type of
equipment safely;
- are familiar with the specific applicable
regulations;
- have understood the operating
procedures defined by the machine
manufacturer.
The appliance may be used by persons with
reduced physical, sensory or mental capabilities,
or lack of experience or the necessary
knowledge, if they are supervised or have
received instructions concerning the safe use of
the appliance and understanding of the dangers
involved.
1.6 Symbols used in the manual
Pictograms are used in the manual to indicate the
type of operator for whom the instructions are
intended, and the dangers, obligations and
prohibitions to be observed to use the machine
safely.
To Next Page
Loading...