PRIMO Instruction Manual
7
1.10 Description of the appliance
Main components of the evaporative cooler
Fig.1.10.1
1.11 Transport and handling
The unit is packed on pallets, with
protective film and fixing straps.
Take care during transport,
unloading, handling and unpacking
to prevent damaging the machine.
Check that there are no visibly damaged parts. If
transport damage is found, do not carry out the
installation and contact the manufacturer. Do not
dispose of packaging elements in the
environment.
WARNING!
Before moving the unit:
- stop the machine;
- cut off power and water supply;
Transport, handling and lifting operations must
be carried out by qualified personnel, using
means, personal protective equipment and
procedures appropriate to the weight and size of
the equipment, in accordance with the
occupational safety regulations in force in the
Country of destination.
For lifting, use ropes or straps with suitable
characteristics, positioned so as not to damage
the packaging and the device (see weight on
nameplate). Do not stand under suspended loads
and within the working area of lifting gear.
To Next Page
Loading...