Franka Emika Panda - Panda - CE out of the box solutions; Notice of liability

Franka Emika GmbH ©October 2018
9
The present Panda system is intended exclusively for use as described in
this User Handbook.
Panda has been developed according to the quality standards of ISO 9001.
The producon of our devices is carried out in a producon company cered
according to ISO 9001. A risk assessment according to ANSI/ ISO 12100 has
been carried out through the course of development and is the basis for Panda
and this User Handbook. Misuse can, nevertheless, cause danger to life and
limb and impairments and damages to the robot and other material assets.
Therefore:
• Panda may only be used in perfect technical condion, for its intended
purpose and within the technical specicaons and operang condions,
with awareness of safety and possible dangers
• Use must comply with the instrucons of this User Handbook
• Malfuncons that may impair safety need to be reced immediately
• Modicaons of Panda are not permissible
The producer is not liable for damages caused by misuse as exemplied above.


This manual contains product descripons for the Panda system components Arm, Control and Hand (hereinaer the system
is also simply referred to as Panda).
If you have purchased a Panda – CE out of the box soluon, please be sure to take account of the supplementary documen-
taon including the CE check list provided, in addion to the present basic documentaon. The CE out of the box soluons
have already been assessed by Franka Emika as to their compliance with the Machinery Direcve so that you as a user merely
need to follow and conrm the steps in the CE check list. In this way, you can use Panda as an assembled machine according
to the EU Machinery Direcve 2006/42/EC. Find out more about CE out of the box soluons at:
www.franka.de/apps/